Breville Espresso Not Extracting Coffee – Fix Now!

Our site includes affiliate links, which may result in us earning an affiliate commission.

Do you also need help with your Breville Espresso not extracting coffee? It’s a worse situation for every coffee lover. The sad news is that it happens because of two serious issues you can only solve when you open the entire espresso machine.

Either the water lines inside the Breville espresso machine are clogged, or you must change them. Otherwise, the issue would be with the water pump of the espresso machine, and you need to replace it with a new one, but the question is HOW?

Luckily, we’ve come to save you from this situation. You have two solutions: contact the company, and they’ll repair your espresso machine. If you don’t want it, the second option is to check our guide. We’ll share how you can replace water lines and pumps.

What’s The Importance of Pump & Water Lines In Espresso Machines?

An espresso machine’s pump and water lines are essential components of the brewing process. Without a continuous stream of water, machines would be unable to generate enough pressure or steam to brew a high-quality espresso.

Furthermore, if pumps and water lines become blocked with mineral build-up or other particles, they will not extract the coffee. That’s why it’s important to maintain the espresso machine regularly, as clogs can ruin the taste of espresso and reduce the life expectancy of your machine.

How To Replace Clogged Water Lines In A Breville Espresso Machine?

The main function of water tubes or lines is to transport the water from the water tank to various components. If these tubes get clogged, there will be no extraction and no steam from the father. You can solve the issue by following the method below.

• Remove the hopper and the water tank from the espresso machine.
• Remove the top cover of the espresso machine with the help of a screwdriver.
• Afterwards, check the back of the espresso machine and remove the screws to open it.
• The screws you’re removing place them somewhere safe.
• You’ll notice water tubes in white color; these are the lines you need to replace.
• Take a plier and remove the clamps from the water tube.
• Pull the pin and remove the water tubes from the espresso machine from each side.
• After removing the tube, check whether or not the o-ring comes with it.
• If the o-ring comes and is available at the end of the tube, then there’s no issue.
• Otherwise, check the place from where you remove the water tube; the O-ring will be there.
• Take out the o-ring with the help of the screwdriver.
• Hold the new water tubes and place the O-ring at the end of both sides.
• Insert the new water tube into the espresso machine.
• Lastly, assemble the espresso machine by attaching the back and top sides with screws.

Note: You can follow the same process for the second water tube if it’s clogged. After installing new tubes, descale your espresso machine.

How To Replace The Water Pump In A Breville Espresso Machine?

Another reason might be the water pump if your espresso machine isn’t extracting much. You can replace it easily. But before that, ensure you have a new water pump to install, which is available in almost all marketplaces.

• Turn off the espresso machine for safety reasons.
• Take out the water reservoir and the hopper.
• Open the espresso machine’s top and back case by removing the screws.
• You’ll notice the water pump when you open the back case.
• You’ll see that the water tubes of the pump are connected to the espresso machine.
• So, first, remove the water tube, then remove the pump.
• Remember to remove the pump; you must use a screwdriver and pliers.
• At last, attach the new water pump and assemble the machine.

Final Words

Follow this guide on Breville Espresso not extracting coffee; you’ll have no problem fixing an espresso machine. Just make sure to follow the steps correctly; otherwise, you’ll face a lot of issues.

If our guide doesn’t work, it’s time to contact Breville or a qualified coffee technician for help. Don’t forget to descale your espresso machine every 100 cycles to prevent future build-up and problems.